print   close

  Peerless Data Sheet

SLS 385 PA
385 SWL 76 190 MRL 4 Ohm    -    Order ID: 830671

This high SPL driver is optimised for use into bass reflex systems in sizes of 65 LTR or larger. The SLS PA woofer line is designed for use in PA systems, and for instrument amplification.
Based on a solid steel basket with low compression design, the models are designed with a weather resistant multi roll linen suspension and Conex spider. This combination provides a solid mechanical suspension construction, that allows the driver to be driven hard.
This 15" model is provided with a 3" ( 76 mm ) voice coil using high temperature resistant materials providing high power handling. The stiff and well damped cone is performing a smooth frequency response. The basket is mounted with a gasket on the front for easy mounting of grills or rear mounting.

Custom designs are available for OEM costumers.


 

SLS 385 PA
Thiele Small parameters: Free air Common Baffled
Nominal impedance Zn (ohm)   4  
Minimum impedance/at freq. Zmin (ohm/Hz)   4.3/194  
Maximum impedance Zo (ohm)   94.5  
DC resistance Re (ohm)   3.6  
Voice coil inductance Le (mH)   2.0  
Capacitor in series with 4 ohm
(for impedance compensation)
Cc (µF)   138  
Resonance Frequency fs (Hz) 40.4   40.4
Mechanical Q factor Qms 7.95   7.95
Electrical Q factor Qes 0.32   0.32
Total Q factor Qts 0.30   0.30
F (Ratio fs/Qts) F (Hz)     133
Mechanical resistance Rms (Kg/s)   3.37  
Moving mass Mms (g) 105.7   105.7
Suspension compliance Cms (mm/N)   0.15  
Effective cone diameter D (cm)   33.8  
Effective piston area Sd (cm²)   897  
Equivalent volume VAS (ltrs)   163.3  
Force factor Bl (N/A)   17.5  
Reference voltage sensitivity
Re 2.83V 1m at 194 Hz (Measured)
(dB)     99.2

Magnet and voice coil parameters:
Voice coil diameter d (mm) 76
Voice coil length h (mm) 16
Voice coil layers n 2
Flux density in gap B (T) -
Total useful flux (mWb) -
Height of the gap hg (mm) 7
Diameter of magnet dm (mm) 190
Height of magnet hm (mm) 20
Weight of magnet (kg) -

Power handling:
Long term Max System Power (IEC) (W) -

Measuring methods and conditions are stated in Peerless Standard for Acoustic Measurements (PSAM)